Tag: YG Acoustics

YG Acoustics Vesper 3

YG Acoustics has introduced the Vesper 3, a new three-way floorstanding loudspeaker in its Reference Series. Positioned between the Carmel 3 and Vantage 3, the Vesper 3 combines a 26mm tweeter, an 18.5cm midrange driver and a 22cm woofer in a three-way configuration.

YG says the model was developed over approximately three years and incorporates technical work carried out during the development of its flagship Titan loudspeaker.

A New Three-Way Model in the Reference Series

The Vesper 3 joins the Reference Series between the Carmel 3 and Vantage 3. Unlike the two-way Carmel 3, the Vesper 3 uses dedicated midrange and bass drivers in a three-way architecture.

Its driver complement consists of a 26mm YG Lattice hybrid tweeter, an 18.5cm aluminum-cone midrange driver and a 22cm aluminum-cone woofer. According to YG, the midrange and woofer use newly developed motor systems together with the company’s proprietary aluminum-cone technology.

Third-Generation Ultracoherent Crossover

The Vesper 3 uses YG Acoustics’ third-generation Ultracoherent crossover network. The company states that this design incorporates research and measurement work carried out during development of the Titan.

Crossover frequencies are specified at 92Hz and 1.71kHz. The 22cm woofer handles the low-frequency range, the 18.5cm driver covers the midrange, and the 26mm tweeter reproduces the high frequencies.

Aerospace-Grade Aluminum Enclosure

As with other models in YG Acoustics’ Reference Series, the Vesper 3 uses an enclosure based on aerospace-grade aluminum. Cabinet components are produced using precision CNC machining, a construction method YG uses to achieve structural rigidity and control enclosure resonance.

YG Acoustics operates engineering and manufacturing facilities in Denver, Colorado, and Cambridge, UK, and the Vesper 3 is produced within this development and manufacturing structure.

30Hz to 40kHz Frequency Range

The Vesper 3 has a specified usable frequency range of 30Hz to 40kHz and a sensitivity of 88dB. Nominal impedance is 4 ohms, with a minimum impedance of 2.8 ohms.

The loudspeaker measures 1,070mm high, 270mm wide and 400mm deep, with a weight of 71kg per speaker.

Standard finishes are Silver and Black.

Positioned Between Carmel 3 and Vantage 3

The Vesper 3 adds a new step to YG Acoustics’ Reference Series lineup. In the company’s current range, it sits above the Carmel 3 and below the Vantage 3, combining a three-way configuration with dimensions smaller than those of the Vantage 3.

YG also highlights the use of technology developed during the Titan program as one of the key elements of the new model.

Availability

The YG Acoustics Vesper 3 is scheduled to become available through authorized dealers worldwide from October 2026.

Pricing has not yet been announced in the company’s official release.

Key Specifications

• Model: YG Acoustics Vesper 3
• Type: Three-way floorstanding loudspeaker
• Tweeter: 26mm YG Lattice hybrid
• Midrange: 18.5cm aluminum cone
• Woofer: 22cm aluminum cone
• Crossover frequencies: 92Hz / 1.71kHz
• Usable frequency range: 30Hz–40kHz
• Sensitivity: 88dB
• Nominal impedance: 4 ohms
• Minimum impedance: 2.8 ohms
• Dimensions: 1070 x 270 x 400mm
• Weight: 71kg
• Finishes: Silver, Black
• Availability: October 2026

Official Website : https://www.yg-acoustics.com/news/vesper-loudspeaker-released/

YG Acoustics has unveiled the new Invincible 3.1 and Invincible 3.2, its latest ultra-high-end active sub-bass systems. Successors to the Invincible 21.1 and 21.2, the new models introduce the company’s newly developed FormCore driver technology together with an optimized amplifier capable of delivering up to 6kW.

According to YG Acoustics, the new Invincible models were designed to achieve greater efficiency and even lower distortion than their predecessors, with the emphasis placed not simply on producing more bass, but on improving scale, depth and realism across the entire musical presentation.

---

New FormCore Driver Technology

The most significant change in the Invincible 3.1 and 3.2 is the introduction of YG Acoustics’ new FormCore driver. Combined with a large motor system, FormCore is said to advance the performance of the company’s previous BilletCore bass driver technology by improving efficiency while further reducing distortion.

The outgoing Invincible 21.1 and 21.2 used YG Acoustics’ distinctive BilletCore technology. Their 53cm, or 21-inch, aluminum diaphragms were machined from aerospace-grade aluminum billets using the company’s in-house CNC equipment, an approach intended to provide exceptional rigidity and precise pistonic behavior even with such a large radiating surface.

YG Acoustics has not yet disclosed the diaphragm material, diameter or manufacturing process used for FormCore. It therefore remains unclear whether the new models retain the previous 21-inch format or introduce a substantially revised driver architecture.

---

Optimized 6kW Amplification and More Than Six Years of Development

The new FormCore driver is paired with amplification capable of delivering up to 6kW. While the 6kW output figure itself was already associated with the previous Invincible 21 series, YG Acoustics says the electronics and control programming have been optimized specifically for the new driver system.

The development process reportedly took more than six years and included extensive simulation, measurement and repeated listening tests. YG Acoustics says the electronics and programming were refined to deliver exceptionally fast response and low distortion while reproducing the lowest frequencies in music with a natural sense of scale and weight.

---

Designed for Integration Rather Than Excess

YG Acoustics emphasizes that the Invincible 3.1 and 3.2 are intended to integrate seamlessly with a main loudspeaker system rather than simply add more low-frequency output. The company describes the new models as delivering effortless bass and extremely fast transient response while supporting, rather than overwhelming, the rest of the musical spectrum.

This reflects the Invincible series’ established role as a sub-bass loudspeaker for full-range high-end systems rather than a conventional home-theater subwoofer. Its purpose is to extend reproduction into the lowest octave while maintaining the speed, precision and tonal integration expected from YG Acoustics’ Reference Series loudspeakers.

---

Detailed Specifications for the 3.1 and 3.2 Remain Undisclosed

YG Acoustics has confirmed the existence of both the Invincible 3.1 and Invincible 3.2, but has not yet published the exact driver configuration of each model. The previous Invincible 21.1 used a single 21-inch driver, while the 21.2 employed two large bass drivers, but it has not yet been officially confirmed whether the new 3.1 and 3.2 follow the same configuration scheme.

Driver diameter, frequency response, DSP and crossover specifications, dimensions and weight have also yet to be announced. At the time of writing, YG Acoustics’ official Reference Series pages continue to list the existing Invincible 21.1 and 21.2, while dedicated product pages for the new Invincible 3.1 and 3.2 have not yet appeared.

---

Pricing and Availability to Be Announced

Official pricing and availability for the Invincible 3.1 and Invincible 3.2 have not yet been announced. Given the positioning of the previous Invincible 21 models among YG Acoustics’ most ambitious Reference Series products, the new generation is expected to remain firmly in the ultra-high-end category.

The most important aspect of the announcement is therefore not an increase in amplifier power, but YG Acoustics’ transition from its long-established BilletCore bass technology to the newly developed FormCore platform. Once further details about the FormCore structure, materials, driver size and performance become available, the technical differences between the new Invincible generation and the outgoing 21 series should become much clearer.